WPW10455331 Whirlpool Dual Water Valve PS11755009

CLICK HERE TO BUY: WPW10455331 Water Valve at D&D

Whirlpool WPW10455331 Dual Water Valve (Secondary)
Has 5/16 inch Quick Connect water inlet port and 5/16 inch Quick Connect water outlet port.
Replaces Part Numbers: W10455331, AP6021683, AH6021683, EAP6021683, PS11755009, B00L5G86HW.

Installing the Whirlpool WPW10455331 Dual Water Valve:

• Slide refrigerator out enough for you to get behind and work.
• Disconnect power and turn off water supply to refrigerator.
• Remove screws off holding the back cover.
• Remove water valve mounting bracket screws.
• Pull water valve out of refrigerator cavity.
• Disconnect each wire harness at each solenoid of valve (Keeping note where each one goes).
• Cut water tubes close to each port where they connect into old valve (Keeping note where each one goes).
• Next insert water tubes respectively into ports of new water valve.
• Tug on the water tube to make sure it's seated properly.
• Attach wire harness leads to their respective solenoid coils.
• Insert water valve into refrigerator cavity and attach water valve mounting bracket screws.
• Turn water on and check for leaks.
• Take a glass & run about a quart of water thru the front dispenser to flush out air that is in the system.
• When all is good, attach back cover and slide refrigerator back into place.
• Now it’s all done and ready to make sparkling ice & deliver clean water.